RFI Emission OS-214plus User Manual download pdf (Page 15)

Cutter Mode

11. Close the top cover and turn on the printer or press the

"FEED" button if the printer is already on.

( Installing the cutter, please refer to Appendix II )

Follow the same procedure as "Loading the Media" from

Note:

step 1 to step 8.

The "FEED" button will not drive the printer to cut. The

cutting work can be executed only when the software

9. Thread the media over the platen roller, then route the media

through the slot of the cutter module.

setting is ready.

10. Press down the print head module firmly.

Cutter Module

1 2 ... 10 11 12 13 14 15 16 17 18 19 20 ... 38 39

No comments

RFI Emission OS-214plus User Manual Page 15