RFI Emission OS-214plus Specifications download pdf (Page 26)

Important notice during TPH replacement

1. Heater line should NOT be touched by bare hands to

prevent any damage caused by ESD or corrosion.

2. Surface of heaters should NOT be hit or scratched by

sharp or hard things to prevent any damage by scratch.

3. Residue or contamination should NOT be removed by a

cutter to prevent any damage by dent or scratch.

4. Connector side should NOT be touched when cleaning

TPH to prevent delaminated solder between FPC and

wafer. Ink-jet characters could be erased, if cleaning cloth

was touched them on FPC or label.

5. Heater surface should be free from any condensation.

6. TPH should NOT be put heater surface down.

Technical Reference

General Specifications

Specification Model

OS-214plus

Print method

Direct thermal and thermal transfer

Resolution

203 DPI (8 dots/mm)

Max. print width

4.16 (106mm)

Max. print length

43 in (1092mm)

Max. print speed

3 inches (76 mm) per second

Memory

8MB SDRAM(7MB User available)

4MB Flash ROM(3MB User available)

CPU Type

32 bit RISC microprocessor

Media Sensor

Reflective x 1

Display

LED indicator x 2

Operation Interface

Button x 1

Communication

Interface

Centronics parallel, RS-232 serial, USB 2.0

(full-speed)

Fonts

Int’l character sets standard

5 alpha-numeric fonts from 0.049” ~0.23” H

(1.25mm ~6.0mm)

All fonts expandable up to 24 x 24

4 direction 0°~270° rotation

Soft fonts are downloadable

Graphic

PPLA: PCX, BMP, IMG, HEX ,GDI

PPLB: PCX, Binary raster , GDI

Ribbon types &

Ribbon size

Wax, Wax/Resin, Resin (Outside coated ribbon)

Ribbon width – 1”~ 4”

Ribbon roll-OD 1.45” (37mm)

Ribbon length-max 92m

Core size – ID 0.5” core (13mm) with notch

1 2 ... 21 22 23 24 25 26 27 28 29 30 31 32 33 34

Comments to this Manuals

No comments

RFI Emission OS-214plus Specifications Page 26

Comments to this Manuals

Related products and manuals for Bar code readers RFI Emission OS-214plus